No, you do not need a driver. The monitors are identified via the signaling line and then installed as a standard or plug & play monitor.
EIZO RadiForce LCD monitors can generally be removed from their bases. They are equipped with four VESA-compatible drill holes to attach other holding devices on the reverse. Before they are fitted, the maximum load-bearing capacity of the mounting device should be checked.
No. In general, every good display port cable is capable of transmitting 4K at 60 Hz.
4K UHD describes a resolution of 3840 x 2160, compared to a resolution of 4096 x 2160 for 4K-DCI. 4K DCI is commonly used in the film industry.
Precisely detailed reproduction requires precisely calculated color and tone values. These cannot be reduced or distorted by calculation errors. In particular, darker portions of images need to be taken into account, since the output values in these areas lie so close to one another. EIZO relies on the highest degree of precision to avoid tonal breaks and bandings: The company has developed microchips that calculate tone values of up to 16 bits, which corresponds to a computational accuracy of up to 1/65,000th.
Typical 1D look-up tables (LUTs) have separate tables for red, green and blue. Depending on the model, EIZO links the color allocation to a single, three-dimensional look-up table (3D LUT) to ensure particularly accurate color control and in doing so, allows for the exact addition of primary colors to any chosen color tone – vital technology for the ideal gray scale and ultra-precise color rendering.
Whether image processing, film and television production, prepress, or photography, whether for professional use or use at home – EIZO ColorEdge monitors impress with their exact and absolutely color-accurate displays.
Wide gamut designates a color space that is considerably larger than the visible palette of conventional LCDs. Depending on the model, it covers up to 100% NTSC and 99% of the Adobe RGB color space. The colors of these monitors bring about a realistic image quality that was previously impossible in LCDs.
The docking features can be enabled and disabled. If the LAN or USB ports are not working even though the cable is correctly connected, these features are disabled. They can be easily turned on again in the Administration menu:
1. Turn the monitor off by pressing the power button on the front.
2. Press and hold both the button on the far left and the power button for several seconds.
3. The Administration menu should now appear with the corresponding options.
The features can be disabled to reduce power consumption when the monitor is not in use, particularly when it is in standby or turned off.
Depending on the body region / methods, different EIZO RadiForce screens are suitable for image display systems in accordance with DIN 6868-157. The EIZO RadiCS quality assurance software is divided into classes I to VIII. The following table shows a classification of suitable screens in this regard.
Note: An acceptance test is necessary for each image display system for an evaluation in accordance with DIN 6868-157.
Information on older EIZO models is available on the EIZO Global website.